Geopipe Installation: Step-by-Step Guide
Subgrade Preparation for Geopipe Installation
For geopipe installation, the geopipe is placed on prepared ground or in a trench dug specifically for it, at the design depth. If the material beneath the geopipe is subgrade soil, it must be compacted to 95% of Standard Proctor compaction to minimise pipe deformation during its service life.
Read also
Geopipe Product
Installing Non-Woven Geotextile
150-200 g/m², acting as a filter
Backfilling Process
The geopipe is laid on the prepared ground or trench and backfilled with aggregate. Before that, the first layer (beneath the geopipe) is usually bedded with about 5-10 cm of aggregate, or granular soil with enough fine grains to provide stable placement.
After this, the trench is backfilled with soil.
Other Articles
Geocell Indonesia: Functions, Price and Quality
Have you ever heard of Geocell Geotextile? This time we will discuss geocell in Indonesia, which can help prevent soil erosion. Make sure you understand this information well so you can keep your ground in good condition. Geocell Geotextile People who do not work in construction may not be familiar with the term geocell. What […]
HDPE Pipe: Leak-Proof Clean Water Pipe Solution
Have you ever been annoyed when the water bill at your home or project suddenly skyrocketed? After checking, the problem turns out to be a classic one: a pipe leaked or burst because it couldn’t withstand the water pressure. Piping problems are often taken lightly, yet their impact can be a real headache. If you […]